|
Do it yourself
| |||
| ||||
How to Replace the Key for the Renault Master
Model: Renault Master
MK 3
- Years:
2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Video tutorial
To replace the key for the Renault Master, take a plastic tool, insert it into the slot of the old key to open it, remove the battery, take out the circuit board, and use a small screwdriver to insert into the pin hole of the old key's blade. Tap the screwdriver to extract it along with the blade (to remove the pin, slightly rotate the key's blade). Take the new key, open it, and remove the blade using the same procedure as for the old key. Take the old blade and insert it in place of the new one, securing it with the fixing pin. Insert the battery into the new shell, position the circuit board in the new shell by inserting the lower hole into the pin, place the battery terminal in its shape, and carefully flip the other shell over, ensuring they fit together (if the two shells do not fit, slightly rotate the key's blade). In the video, the new shell does not have a provision for the manufacturer's logo, so it was removed with a small flat screwdriver from the old shell, the pins of the emblem were taken out, and it was glued to the new shell. If the new shell had a provision for the logo, we would have removed it from the old shell using the same procedure but glued it into the provision of the new shell without removing the original pins.
Updated on 23 July 2026 by ScegliAuto
Related tutorials
Renault Master
(2010-2023 /
MK 3)
If you need to replace the rear headlight bulb of your Renault Master, but you don't know how to do it, then you just have to carefully read the foll…
Renault Master
(1997-2010 /
MK 2)
To replace the battery inside your Renault Master key, follow the procedure outlined in this guide. First, ensure you have a new, fully compatible ba…
Renault Master
(2024-2026 /
MK 4, XDD)
If you want to replace the battery in your Renault Master fourth generation key yourself but are unsure of the necessary steps, just read this guide.…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.104
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |