|
Do it yourself
| |||
| ||||
How does the tire pressure control system on the Renault Zoe work?
Model: Renault Zoe
MK 1
- Years 2013-2024
In this video, we see how the tire pressure monitoring system works on the Renault Zoe: in case of a pressure drop, the emergency light on the instrument panel turns on, accompanied by the message "adjust tire pressure" and the affected wheel will appear highlighted in yellow with the pressure indicated in Bar. The recommended pressure by the manufacturer is shown on the adhesive label found on the driver's door, where the pressures for full load and normal load are indicated. The light will turn off by itself after a few minutes of driving, once the correct pressure is restored. To set specific usage conditions, repeatedly press the "menu" button until the "inflation pressure" title is highlighted, then hold down the "ok" button to start the procedure, which will be completed after a few minutes of driving. Various messages can occur; for example, if the spare tire is mounted, the TPW will not be available. If the wrench and "check TPW" message light up simultaneously, it means there is a malfunction in the system.
Posted on 4 May 2023 by ScegliAuto
Video tutorial
Related tutorials
Renault Zoe
(2013-2024 /
MK 1)
The institutions mentioned in this guide will show us how to remove the tire pressure monitoring system (TPMS) warning light on the Renault Zoe instr…
Renault Zoe
(2013-2024 /
MK 1)
Today's guide will show us how to reset the tire pressure warning light on the Renault Zoe. Before performing the reset, it is necessary for all four…
Renault Zoe
(2013-2024 /
MK 1)
Following these brief and simple steps, we will see the procedure for resetting the tire pressure warning light on the Renault Zoe; before resetting …
Other guides you may be interested in
|
Installation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.048
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
