Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
This video is currently unavailable

If the low tyre pressure warning light has illuminated on the dashboard, you must first check for a puncture. If there is no puncture, restore the recommended tyre pressures and then proceed to reset the warning light that has illuminated on the instrument panel.

Below are the steps to reset the indication. After turning on the ignition, repeatedly press one of the buttons located at the end of the right-hand control lever until you select the 'set tyre pressure' option.

Then, hold down the command above to initiate the reset. After ten seconds, the error message will clear.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to reset the tire pressure warning light (TPMS) of the Renault Clio
How to reset the tire pressure warning light (TPMS) of the Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today we will see how to reset the tire pressure warning light (TPMS) of the Renault Clio; before performing the reset, it is necessary that all four…
How to reset the TPMS light of the Renault Clio 4
How to reset the TPMS light of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will explain how to reset the TPMS light on the Renault Clio 4. To reset the light, we need to turn on the instrument panel and press the BC…
Resetting the Tyre Pressure Warning Light on a Renault Clio 4
Resetting the Tyre Pressure Warning Light on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today, we will see in this video tutorial how to reset the tyre pressure warning light (TPMS) that appears on the dashboard of the Renault Clio fourt…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos