Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Renault Megane Megane 1 - Years 1995-2003
Part: Cabin air filter

This brief video tutorial shows how to replace the cabin air filter in a Renault Megane. The filter is located between the bonnet and the windscreen of the vehicle (see the arrow indication). The arrow points to the cover that protects the air filter. You will need to remove the rubber seal and press the two clips to open the cover. At this point, unscrew the two Torx screws that secure the cover. You can then remove the old filter. Now, insert a new one. These filters should be changed every 9,300 miles or annually.

Updated on 18 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Instructions for Replacing Cabin Air Filter
Instructions for Replacing Cabin Air Filter
Renault Megane (1995-2003 / Megane 1) The cabin air filter is located just below the windscreen, right under the driver's side wiper: remove the plastic protective grille, unscrew the scr…
Replacing Cabin Filter on Renault Megane
Replacing Cabin Filter on Renault Megane
Renault Megane (2002-2010 / Megane 2) In this video tutorial, you will learn how to replace the cabin filter on the second series Renault Megane. First, get inside the vehicle and remove …
Cabin Air Filter Replacement Instructions
Cabin Air Filter Replacement Instructions
Renault Megane (1995-2003 / Megane 1) The cabin air filter is located just below the windscreen on the driver's side, corresponding to the wiper blade: to replace the filter, you must ope…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos