Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Kangoo
    4. : How to remove the door panel of the Renault Kangoo.

Renault Kangoo - Video tutorial

Model: Renault Kangoo KW, KC, MK 1 - Years 1997-2008
Part: Door panel
Operation: How to remove the door panel of the Renault Kangoo.

Today's instructions will show us how to disassemble and replace the front door panel of the Renault Kangoo. First, we open the front door and begin to disassemble and remove the plastic cover that we find on the lower part of the door panel; then we disconnect the electrical connector that we find below, as shown in the video. At this point, we unscrew the panel fixing screws to detach it and remove it from the sides, disconnecting the handle cable; this will allow us to access the speaker, and finally reassemble the door panel!


Posted on 14 June 2023 by ScegliAuto



Removing the door panel on Renault Kangoo
Renault Kangoo (1997-2008 / KW, KC, MK 1) How do you remove the door cover panel? Let's see the disassembly of the door panel of a Renault Kangoo. We open the car door, unscrew the screws pla
Removing the Renault Kangoo front door panel
Renault Kangoo (1997-2008 / KW, KC, MK 1) In this video tutorial we will see how to remove, in simple steps, the front door panel on a Renault Kangoo first series. First we open the front doo
How to disassemble the front door panel of the Renault Kangoo.
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today's guide will show us how to disassemble and replace the front door panel of the Renault Kangoo, in simple and quick steps. First, we open the f

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos