Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the interior door handle of the Renault Kangoo

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Handle

See other generations:
Video tutorial

This short and simple guide will show us the steps on how to disassemble and replace the internal handle of the front door of the Renault Kangoo, following the instructions below. First, we open the front door of the car and start prying on the side of the opening handle; then we disconnect the handle cable found on the back, as shown in the video.

At this point, we remove and replace the door handle, installing the new original one; make sure the opening handle works correctly.


Posted on 16 March 2025 by ScegliAuto


Related tutorials

How to Remove the Interior Door Trim of the Renault Kangoo
How to Remove the Interior Door Trim of the Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) In this guide, we will see the main instructions on how to remove and replace the interior trim or panel of the door of the Renault Kangoo. First, op…
How to Replace the Outer Handle on a Renault Kangoo?
How to Replace the Outer Handle on a Renault Kangoo?
Renault Kangoo (2007-2021 / MK 2, FC, FW) To replace the outer handle on a Renault Kangoo, open the corresponding door to access the side where the handle is located. Here, you will find a ci…
How to reassemble the door panel of the Renault Kangoo
How to reassemble the door panel of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) Today we will see the instructions that will allow us to reassemble the front door panel of the Renault Kangoo. First of all, we bring the panel clos…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos