Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outer Handle on a Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Handle

To replace the outer handle on a Renault Kangoo, open the corresponding door to access the side where the handle is located. Here, you will find a circular rubber cover that needs to be removed to access the screw underneath. Loosen this screw to pull out the door lock cylinder from its housing. Once removed, you can also pull out the corresponding handle, allowing you to insert the new one and reassemble all the removed components.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the interior door handle of the Renault Kangoo
Disassembly of the interior door handle of the Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) This short and simple guide will show us the steps on how to disassemble and replace the internal handle of the front door of the Renault Kangoo, fol…
How to Remove the Sliding Door Trim of the Renault Kangoo 2?
How to Remove the Sliding Door Trim of the Renault Kangoo 2?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The sliding side door of the Renault Kangoo 2, as seen in the example video, is equipped internally with a handle and armrest like all car doors, unl…
How do you remove the door panel in the Renault Kangoo 2?
How do you remove the door panel in the Renault Kangoo 2?
Renault Kangoo (2007-2021 / MK 2, FC, FW) The reasons for disassembling the inner panel of a car door are various, such as repairing the handle, the window mechanism, the control button, as w…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos