Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor in the Renault Megane?

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Starter motor

See other generations:
Video tutorial

In this tutorial, you will see how to replace the starter motor in the Renault Megane, a simple operation but one that requires good manual skills. First, disconnect the negative terminal of the battery, then lift the front right side of the car with a jack.

Next, remove the lower panel of the compartment, disconnect the collector and all indicated connectors, and locate the starter motor. At this point, disconnect the two power terminals, unscrew the mounting bolts, and extract the motor from its housing.

Follow the reverse procedure to install the replacement.


Updated on 7 August 2026 by ScegliAuto


Related tutorials

How to Replace the Starter Motor on a Renault Megane
How to Replace the Starter Motor on a Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) Today we will go through the instructions that will allow us to remove and replace the starter motor on a Renault Megane. First, let's open the bonne…
How to Replace the Starter Motor on a Renault Megane 1.9 dCi
How to Replace the Starter Motor on a Renault Megane 1.9 dCi
Renault Megane (1995-2003 / Megane 1) This brief and simple guide will show you how to remove and replace the starter motor on a Renault Megane 1.9 dCi. First, open the bonnet and disconn…
How to Replace the Starter Motor on a Renault Megane?
How to Replace the Starter Motor on a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the starter motor on a Renault Megane, open the bonnet to access the components inside the engine bay. Disconnect the cover from the top o…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos