Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Interior Light Fitting on the Renault Megane

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Interior dome light bulb

See other generations:
Video tutorial

This brief guide outlines the steps to remove and replace the interior light fitting on the Renault Megane. First, get inside the vehicle and pry the side of the light fitting to remove the transparent cover; then press the side tabs to detach the entire fitting from the ceiling, as shown in the video.

Next, disconnect the electrical connector found at the back of the fitting; if necessary, replace the small bulb, applying the reverse procedure for reassembly!


Updated on 7 August 2026 by ScegliAuto


Related tutorials

Replacing the number plate bulbs on the Renault Megane
Replacing the number plate bulbs on the Renault Megane
Renault Megane (2015-2023 / Megane IV, Megane 4) In this short and simple guide, you will see how to remove and replace the number plate lights on the Renault Megane by following these simple steps.…
How to Replace the Number Plate Lights on the Renault Megane
How to Replace the Number Plate Lights on the Renault Megane
Renault Megane (2002-2010 / Megane 2) Follow these step-by-step instructions to remove and replace the number plate bulbs on the Renault Megane in simple, quick steps. First, move to the …
How to Replace the Interior Light Bulbs in the Renault Megane?
How to Replace the Interior Light Bulbs in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you will see how to replace the interior light bulbs in the Renault Megane MK3, a very simple and quick operation. Start by graspin…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos