Do it yourself
Frequently asked questions about cars and motorcycles

How to Enter the Radio Unlock Code in the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years 2007-2021
Part: Warning light – error code

In this tutorial, see how to enter the radio unlock code in the Renault Kangoo. This operation is necessary when replacing the battery or temporarily disconnecting it. The code can be found with the documents provided at purchase, but if lost, it can be retrieved through various online services. Once obtained, turn on both the instrument cluster and the radio, then repeatedly press the "1" button until the first digit is entered. Enter the remaining digits following the same logic and save the setting by holding down the "6" button.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Kangoo (2007-2021 / MK 2, FC, FW) The Renault Kangoo, like all vehicles, has a radio unlock code that must be entered when the radio is locked due to battery replacement. The unlock c…
Renault Kangoo (2007-2021 / MK 2, FC, FW) This tutorial shows how to retrieve and enter the unlock code for the radio in the Renault Kangoo, a very simple and quick operation, for example aft…
Renault Kangoo (2007-2021 / MK 2, FC, FW) .. In this tutorial, we can see how to enter the radio unlock code in the Renault Kangoo, a very simple and quick operation, to be done.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Kangoo 2007-2021 - What does the Serv warning light mean on a Renault Kangoo? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos