Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Front Suspension Wishbone

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Suspension system

See other generations:
Video tutorial

To replace the front suspension wishbone, lift the vehicle on a ramp and start by removing the front wheel and the wheel arch liner; then remove the nut securing the tie rod end from the hub support and extract the tie rod end itself; move on to the wishbone's tie rod end and, before accessing the fixing pins of the wishbone to the engine cradle, lower the connecting crossmember, supporting it with a jack; once the fixing pins are removed, it is possible to take out the old wishbone and install the new one by reversing the process.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

How to Replace the Lower Wishbone on a Renault Scenic 2
How to Replace the Lower Wishbone on a Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) Replacing the lower wishbone of the front suspension requires lifting the vehicle on a ramp and first removing the front wheel and the wheel arch lin…
How to replace the Renault Scenic's control arm
How to replace the Renault Scenic's control arm
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Today we will explain how to replace the control arm on a Renault Scenic model 3 vehicle. To perform the replacement of the arm, we need to remove th…
How to Replace the Wishbone of the Renault Scenic
How to Replace the Wishbone of the Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) To replace the wishbone of the Renault Scenic, lift the vehicle so that the corresponding wheel is not in contact with the ground. At this point, loo…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos