Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Key Remote of the Renault Clio

Model: Renault Clio Clio 1, MK 1 - Years 1990-1998
Part: Key

In this guide, we will see the instructions to disassemble the key by removing the two plastic shells and accessing the electronic board of the Renault Clio. First, take your remote in hand and start prying on the side to separate the two plastic covers; then access the electronic board and the battery, as shown in the video. Replace the battery with a new one if necessary, or replace the entire key shell; finally, reassemble the remote, following the video tutorial to the end!

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Renault Clio 2 remote control
How to replace the battery of the Renault Clio 2 remote control
Renault Clio (1998-2005 / Clio 2, MK 2) Replacing the key battery becomes necessary when it stops working. In the case of the Renault Clio 2, to replace the battery we must: - open the key/…
How to program the key remote of the Renault Clio
How to program the key remote of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The information outlined in this guide will show us how to program the remote control key of the Renault Clio, following the instructions below. Firs…
How to Open the Doors with a Flat Remote Battery on a Renault Clio
How to Open the Doors with a Flat Remote Battery on a Renault Clio
Renault Clio (2019-2026 / Clio V, Clio 5) Today's instructions will allow you to open the doors of a Renault Clio with a flat remote battery. First, take your remote and extract the physical …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos