Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Cabin Air Filter

Model: Renault Koleos MK 1 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Cabin air filter

See other generations:
Video tutorial

The cabin air filter for the car model in question is located just behind the central console, at the front of the tunnel, and is accessed from the driver's side; to reach the air duct housing, it is necessary to remove the plastic trim panel located to the side of the central tunnel, in front of the gear lever, and then the sound-absorbing cover applied just below the steering column (secured with push clips); once you reach the duct, remove the cap from the filter housing, extract it, ensure there are no dirt residues, and insert the new one.


Updated on 19 February 2026 by ScegliAuto


Related tutorials

Replacement of the cabin air filter of the Renault Koleos.
Replacement of the cabin air filter of the Renault Koleos.
Renault Koleos (2016-2024 / MK 2) These short and simple steps will allow us to replace the cabin air filter of the Renault Koleos. First, we open the front door on the driver's side …
How to Replace the Air Filter on a Renault Koleos
How to Replace the Air Filter on a Renault Koleos
Renault Koleos (2008-2015 / MK 1) To replace the air filter on a Renault Koleos, open the bonnet to access the components inside the engine bay. Locate the air filter, which is on the…
How to Change the Cabin Filter on a Renault Koleos
How to Change the Cabin Filter on a Renault Koleos
Renault Koleos (2016-2024 / MK 2) In this video, we will see how to change the cabin air filter on a Renault Koleos. The filter is located on the driver's side, behind a panel situate…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos