Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter on the Renault Koleos 2.0 DCi

Model: Renault Koleos MK 2 - Years 2016-2024
Part: Cabin air filter

In this video, we see how to change the pollen filter of a Renault Koleos 2.0 DCi: we start by removing the side panel in the footwell on the driver's side. We need to go right underneath, on the right side of the accelerator pedal we find the pollen filter container. Unfortunately, to remove it, we also need to remove the base of the dashboard from its housing. First, we need to remove the screws holding the switch panel at the bottom left of the dashboard, with the hood and fuel door release buttons. Once these screws are removed, we can loosen the dashboard, creating space to reach in with our arm and remove the filter from its housing. Although it's not easy, we must clean the drawer of dust and residue before inserting the new filter. Then we can put the dashboard, buttons, and screws back in place. Reassemble the plastic panel on the driver's footwell side and the job is done.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the EGR Valve on the Renault Koleos 2.0 dCi - Samsung QM5
How to Replace the EGR Valve on the Renault Koleos 2.0 dCi - Samsung QM5
Renault Koleos (2008-2015 / MK 1) In this video tutorial, you will learn how to remove and replace the EGR valve on the Renault Koleos 2.0 dCi, as well as the Samsung QM5. First, open…
Replacement of the cabin air filter of the Renault Koleos.
Replacement of the cabin air filter of the Renault Koleos.
Renault Koleos (2016-2024 / MK 2) These short and simple steps will allow us to replace the cabin air filter of the Renault Koleos. First, we open the front door on the driver's side …
…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos