Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Brake pads

This guide shows how to replace the front brake pads, a relatively simple task to do at home.
Start by removing the wheel; loosen the bolts and then lift the car onto a jack, proceeding to take off the wheel.
Using a 13mm and a 17mm spanner, as shown in the video, remove the brake pad support and take out the old pads.
Position the piston using a clamp as demonstrated in the guide, insert the new pads, and close the caliper. Refit the wheel, and you're done.
The video demonstrates this procedure on a Renault Clio 2, but the process is similar for all vehicles with disc brakes.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Brake Pads
Renault Clio (1998-2005 / Clio 2, MK 2) This video illustrates how to replace the brake pads on a Renault Clio. First, remove the rear wheel after positioning the vehicle on a jack. Once yo…
How to change the front brake pads on the Renault Clio 4
How to change the front brake pads on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, you will see step-by-step instructions for removing and replacing the front brake pads on the fourth generation Renault Clio. First, l…
How to Replace the Brake Shoes on a Renault Clio
How to Replace the Brake Shoes on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Learn how to replace the rear brake shoes on a Renault Clio. Position the car on a column lift, loosen the pins with a socket spanner, and raise it t…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos