Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace Brake Pads

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Brake pads

This video illustrates how to replace the brake pads on a Renault Clio. First, remove the rear wheel after positioning the vehicle on a jack. Once you locate the brake caliper, use a 12-13 mm spanner and another 16-17 mm spanner to loosen the bolts and free the caliper. In this case, the pads are almost completely worn, and if not replaced, the friction could even damage the discs. Before fitting the new pads, you must expand the pistons inside the caliper (using a rewind tool). After inserting the new pads, retrace your steps. Finally, pump the brake pedal a few times to ensure contact between the new pads and the cylinder.

Updated on 5 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the front brake pads of the Renault Clio
Replacement of the front brake pads of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The instructions in this guide will show us the process of disassembling and replacing the front brake pads of the Renault Clio. First, lift the vehi…
Replacing Brake Pads
Renault Clio (1998-2005 / Clio 2, MK 2) Lift the vehicle at the wheel where the repair will be made and remove the wheel. Unscrew the fixing pins of the brake caliper located at the rear, r…
How to change the front brake pads on the Renault Clio 4
How to change the front brake pads on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, you will see step-by-step instructions for removing and replacing the front brake pads on the fourth generation Renault Clio. First, l…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos