|
Do it yourself
| |||
| ||||
How to Replace Front Shock Absorbers
Model: Renault Fluence
MK 1
- Years 2009-2019
Place the car on a ramp or lift it with a jack to a comfortable height for working. Remove the front wheel. Detach the clip holding the brake cable in place by unscrewing the bolt with the appropriate spanner. Now unscrew the bolts that secure the shock absorber (one at the top and two at the bottom). Lift the wheel with a hydraulic jack to relieve tension from the shock absorber. Open the bonnet. Now remove the two wipers by unscrewing the pivot bolt after removing its cover. Unscrew the two bolts on the sides that secure the plastic cover of the engine compartment. Remove the cover starting from the sides, taking off the seals and finally removing the long central part. Remove an additional cover by unscrewing the bolts that secure it. Now unscrew the three bolts that secure the shock absorber at the top and extract it from its position. Compress the shock absorber with a special machine and unscrew the bolt that secures the spring. Replace the spring with the new one and position it, then reassemble the shock absorber as shown in the images. Refit the bolt that secures the spring and reinsert it into its position. For reassembly, perform the same operations in reverse order. The replacement operation was performed on a Renault Fluence.
Updated on 20 February 2026 by ScegliAuto
Video tutorial
Related tutorials
Renault Fluence
(2009-2019 /
MK 1)
The fuses of the Renault Fluence are located inside the appropriate fuse boxes that are installed on the vehicle: in this type of vehicle it is possi…
Renault Fluence
(2009-2019 /
MK 1)
Today, I will explain how to independently replace the cabin air filter on the Renault Fluence. Before starting the replacement, it is important to r…
Renault Fluence
(2009-2019 /
MK 1)
In this tutorial, you will see how to replace the dipped beam bulbs in the Renault Fluence, a very simple and quick operation. First, open the bonnet…
Other guides you may be interested in
|
How to Replace the Remote Battery for the Volvo XC40?
In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.139
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |