Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

A Simple Solution for the Airbag Warning Light

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Warning light – error code

See other generations:
Video tutorial

In this video, we show how to easily and economically resolve the issue of the airbag warning light staying on. Moreover, in most cases, modern vehicles have many airbags installed, making it difficult to determine which airbag is involved without an OBD11 reader.

In the case of the video, it concerns a Renault Trafic II with only one airbag, making it easier: the wires shown are for the airbag and the horn, while the yellow one behind is the electric signal input.

To check functionality, you will need 2.2 Ohm fuses (available in packs of 50), and by testing them, you can eliminate the warning light by exclusion. If the system does not work, it means the fault lies between here and the control unit.


Updated on 16 August 2026 by ScegliAuto


Related tutorials

How to remove the steering wheel airbag of the Renault Trafic
How to remove the steering wheel airbag of the Renault Trafic
Renault Trafic (2001-2014 / MK 2) Removing the steering wheel airbag from the Renault Traffic is a fully achievable operation on your own. To remove the airbag, we need to insert a fl…
How to Remove the Steering Wheel Airbag from the Renault Trafic?
How to Remove the Steering Wheel Airbag from the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) To remove the steering wheel airbag from the Renault Trafic, insert a screwdriver into the hole located at the back of the steering wheel. Inside, th…
How do you deactivate the passenger side airbag in the Renault Trafic?
How do you deactivate the passenger side airbag in the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) A clarification is needed, in the video here we see the operation of activating and deactivating the passenger side airbag in a Renault Espace, but t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos