Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Pressure Warning Light on the Renault Clio 4

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Tire pressure warning light

In this video tutorial, we can see how to reset the tyre pressure warning light on our Renault Clio 4. The procedure is very simple and quick to perform. First, we need to turn on the instrument cluster without starting the engine, then use the up arrow button located on the right-hand side of the steering column to scroll through the menu until we find the option to set tyre pressure. Once found, hold the up arrow button until the display shows 'tyre pressure set TPW', release the button and press it again, holding it down for about 5 seconds until 'set TPW' appears and the tyre pressure warning light goes off.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) In this article, you will learn how to reset the tyre warning light on the Renault Clio 5. The procedure is simple and takes less than 1 minute to co…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, one of the methods to retrieve the radio code for the Renault Clio IV is suggested: download the "MyRadio" application specific for Re…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The tire pressure warning light that appears on the instrument panel of the Renault Clio can be completely eliminated by turning on the instrument pa…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos