|
Do it yourself
| |||
| ||||
How to reset the service reminder on Renault Kangoo.
Model: Renault Kangoo
FFK, KFK, MK 3
- Years 2020-2026
In this video, we see how to reset the service reminder on the Renault Kangoo (but the procedure is the same for the Nissan NV250 as well). We will use the "up" and "down" arrows on the wiper lever satellite, following the instructions given by the dashboard. By pressing the upper arrow, we scroll until we reach the service indication, then we press both buttons until the indication starts flashing. We must continue pressing until it stops. At this point, it will indicate the remaining mileage until the next service, and the service will be correctly reset.
Posted on 26 September 2023 by ScegliAuto
Video tutorial
Related tutorials
Renault Kangoo
(1997-2008 /
MK 1, KC, KW)
In this tutorial we can see how to reset the service in the Renault Kangoo, an extremely simple and quick operation, to be carried out only once all …
Renault Kangoo
(2007-2021 /
FW, FC, MK 2)
In this tutorial, we can see how to reset the service on the Renault Kangoo, an extremely simple and fast operation, to be carried out only after com…
Renault Kangoo
(2020-2026 /
FFK, KFK, MK 3)
In this tutorial, you will see how to reset the service in a Renault Kangoo, an extremely simple and quick operation, to be performed only after comp…
Other guides you may be interested in
|
Frequently Asked QuestionsInstallation of Upgraded Intercooler Radiator with Pipes
Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
