Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2020 Renault Captur

Model: Renault Captur MK 2 - Years 2019-2026
Part: Service warning light

If you are curious about the steps to correctly perform a manual reset of the service light on your Renault Captur Mk2 (2020), simply read the following guide and apply the instructions. First, get into the car and turn on the ignition. Then, press the menu button several times until the oil change message appears on the display. At this point, as indicated on the display, press and hold the "OK" button for a few seconds and wait for the reset of the light to complete.

Updated on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Captur 2020
How to reset the service light on the Renault Captur 2020
Renault Captur (2019-2026 / MK 2) To correctly perform the manual reset of the service light on your second-generation Renault Captur (year 2020), you need to follow the procedure des…
How to Reset the Service Light on a 2020 Renault Captur
How to Reset the Service Light on a 2020 Renault Captur
Renault Captur (2019-2026 / MK 2) If you want to manually clear the service light that comes on every time you start your 2020 Renault Captur, follow these instructions carefully. Fir…
How to reset the service light on the 2018 Renault Captur
How to reset the service light on the 2018 Renault Captur
Renault Captur (2013-2019 / MK 1) The first series Renault Captur (year 2018) fortunately has a rather simple procedure for completing the manual reset of the service light, and thank…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos