Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Renault Modus?

Model: Renault Modus MK 1 - Years 2004-2013
Part: Tail light bulb

To replace the rear headlamp bulb on a Renault Modus, open the rear hatch to access the side of the boot. Here, open the cover corresponding to the bulb that needs replacing, allowing the knob underneath to be unscrewed. Once the knob is loosened, you can remove the headlamp from its housing by disconnecting the connector and removing the holder that contains the bulbs. The old bulbs can then be extracted and replaced with new spares, before remounting the headlamp.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace the Bulb and Headlamp of the Renault Modus
Replace the Bulb and Headlamp of the Renault Modus
Renault Modus (2004-2013 / MK 1) This guide outlines the procedure necessary for removing and replacing the headlamp and bulb of the front headlamp of the Renault Modus. First, open …
How to replace the rear headlight bulb of a Renault Modus?
How to replace the rear headlight bulb of a Renault Modus?
Renault Modus (2004-2013 / MK 1) To replace the rear light bulb of a Renault Modus, start by opening the trunk to access the rear light. Locate the access cover on the back of the li…
How do you replace the headlight bulb of the Renault Modus?
How do you replace the headlight bulb of the Renault Modus?
Renault Modus (2004-2013 / MK 1) To replace the headlight bulb installed on the Renault Modus, you need to open the hood so that you can access the inside of the headlight assembly. …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos