Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Clio?

Model: Renault Clio Clio V, Clio 5 - Years 2019-2026
Part: Service warning light

On the Renault Clio, the service light can be reset by following the steps illustrated in this video, which are as follows: 1) turn on the ignition; 2) press the button with the downward arrow (at the end of the stalk on the right side of the steering wheel) until you reach the display screen that shows "service intervals"; 3) press and hold the button to confirm; 4) when the screen changes, release the button and press it again until the message starts to flash; 5) press the button with the upward arrow on the same stalk; 6) repeat steps 2, 3, and 4 to reset the oil light as well.

Updated on 23 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Clio V
How to Reset the Service Light on a Renault Clio V
Renault Clio (2019-2026 / Clio V, Clio 5) .. Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine a.. …
How to Reset the Service Light on a Renault Clio
How to Reset the Service Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In today's video, you will see how to reset the service interval on a Renault Clio, thereby turning off the corresponding light. This tutorial also a…
How to Reset the Tyre Pressure Warning Light on a Renault Clio?
How to Reset the Tyre Pressure Warning Light on a Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) To reset the tyre pressure warning light on a Renault Clio, first access the onboard computer menu. Before doing this, ensure the tyre pressures are …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos