Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : How to replace the front anti-roll bar.

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Anti roll bar
Operation: How to replace the front anti-roll bar.

Place the car on the bridge and raise it to a comfortable height for working (it is also possible to raise the front part of the car with the jack). Remove the front wheel corresponding to the anti-roll bar to be replaced. Locate the bar and, after lubricating the two bolts holding it in place, unscrew the bolts themselves and remove it. Take the new bar and place it in the same position. Screw the two bolts (with the appropriate wrenches) that secure it. Refit the wheel and lower the car off the bridge. The maintenance operation seen in the images was carried out on a Renault Scenica.


Posted on 10 September 2023 by ScegliAuto



Replacement of anti-roll bar bushing
Renault Scenic (1996-2003 / ) If you hear noise coming from the front of the car, especially when driving on bumpy roads, it is likely that a bushing of the anti-roll bar may have
HOW TO REPLACE THE FRONT ANTI-ROLL BAR BOLTS
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) To remove the front sway bar bolts, you must first lift the car onto a bridge. At this point, a skilled guide will show us in a practical way the ste
Front indicator bulb replacement
Renault Scenic (2009-2015 / MK III, MK 3, Scenic III, Scenic 3) The front arrow is integrated in the headlight itself: in order to replace the relative bulb it is therefore necessary to open the front hood and int

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos