Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Air Filter

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

Open the bonnet and locate the filter housing on the left side of the engine. Disconnect the air intake hose and then remove the housing by unfastening it from the support.

Remove the cover by unscrewing the two retaining screws. Pull out the old filter and insert a new one. Before inserting the new filter, clean the inside of any dust deposits.

Carefully close the air box, ensuring it fits perfectly with the cover. Accurately reattach the flexible hose.

Start the engine and check for proper operation.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

Replacing the Engine Air Filter on a Renault Megane 2
Replacing the Engine Air Filter on a Renault Megane 2
Renault Megane (2002-2010 / Megane 2) Replacing the engine air filter is a straightforward DIY maintenance task that is important for ensuring the engine always draws clean air, benefitin…
How to Replace the Engine Air Filter on the Renault Megane 3
How to Replace the Engine Air Filter on the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If you intend to change the engine air filter of your Renault Megane third series yourself, simply follow the steps described below one by one. First…
How to Change the Air Filter in the Renault Megane 4?
How to Change the Air Filter in the Renault Megane 4?
Renault Megane (2015-2023 / Megane IV, Megane 4) Learn how to change the engine air filter in a Renault Megane 4 with the help of this short video tutorial. As you can see, the filter box is located…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos