Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Engine Air Filter on a Renault Megane 2

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Air filter

See other generations:
Video tutorial

Replacing the engine air filter is a straightforward DIY maintenance task that is important for ensuring the engine always draws clean air, benefiting both performance and fuel consumption. On this model, the engine air filter box is located just behind the battery and is mounted vertically.

To remove the filter, unscrew the two front screws securing the cover, then slide it upwards like a drawer. Once the old filter is removed, clean out any dirt residues by vacuuming rather than blowing, to prevent dirt from entering the intake.

Then, fit the new filter and reattach the cover.


Updated on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Air Filter on a Renault Megane 3
How to Replace the Engine Air Filter on a Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If the engine of your Renault Megane Mk3 often overheats even at low revs, it is likely time to replace the air filter. In this guide, you will learn…
How to Replace the Air Filter of the Renault Megane
How to Replace the Air Filter of the Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) To replace the air filter on a Renault Megane, first open the bonnet and then proceed to remove the air hose by releasing the clips on the side and t…
How to Replace the Air Filter of the Renault Megane 3
How to Replace the Air Filter of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) The air filter on a Renault Megane 3 is located under the bonnet, just behind the engine and near the battery. Replacing the air filter on this type …

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos