Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Megane
    4. : How to replace the air filter of the Renault Megane 3

Renault Megane - Video tutorial

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Air filter
Operation: How to replace the air filter of the Renault Megane 3

The air filter on a Renault Megane 3 vehicle is located inside the front hood, right behind the engine and next to the battery. Replacing the air filter on this type of car requires the use of a cross socket wrench. We begin by removing the filter by opening the engine hood and unscrewing the nut that locks the filter cover with the cross socket wrench. Once the nut is removed, we extract the filter from its housing and insert the new one. We then reinsert the filter and tighten the nut with the socket wrench. Finally, start the vehicle to ensure that the replacement has been done correctly.


Posted on 30 March 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Megane 2002-2010 - Where is the air filter located in the 2003 Renault Megane 2 1.6 16v? Read Answer
    • Megane 2002-2010 - Where is the Renault Megane Mk2 1.9 dCi engine air filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos