Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the timing belt of the Renault Clio 1.2.

Model: Renault Clio Clio 3, MK 3, Clio III - Years 2005-2013
Part: Timing belt

The following steps will show us how to disassemble and replace the timing belt of the Renault Clio 1.2 petrol. First, we lift the vehicle and begin by removing the right front wheel and the wheel arch; then we disconnect the V-belt by loosening the tensioner and unscrew the screws of the timing cover, as shown in the video. At this point, we take the necessary references for the replacement of the timing belt, for the subsequent synchronization; we install the original belt and reassemble everything, applying the reverse procedure!

Posted on 24 November 2023 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Renault Clio 1.2
Guide to replacing the timing belt of the Renault Clio 1.2
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Today we will discover the instructions that will allow us to dismantle and replace the timing belt of the Renault Clio 1.2 petrol. First, we open th…
Renault Clio 1.5 DCi timing belt replacement
Renault Clio 1.5 DCi timing belt replacement
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In today's video tutorial we will see the main instructions on how to remove and replace the timing belt of a Renault Clio 1.5 DCi, but also on other…
Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …

Other guides you may be interested in

How to Remove the Front Bumper Grille on a Ford Focus

Want to replace the central air grille on your vehicle? Here’s how to remove the front bumper grille on a Ford Focus: using a plastic lever or screwdriver, pry between the bumper plastic and the grille, detach the securing clips located on it. Finally, remove the grille from the centre of the bumper, and compare it with the one that will replace it. To proceed with the installation: secure the grille onto the bumper by engaging the clips (apply pressure with your hands on the grille without breaking it). Check the correct installation of the parts.

Watch the video!


by ScegliAuto

More videos