Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the timing belt of the Renault Clio?

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Timing belt

See other generations:
Video tutorial

In order to replace the timing belt of the Renault Clio, you need to completely remove the front right wheel of the car, along with the corresponding wheel arch: once these components have been removed, you will be able to locate the tensioner pulley located on the side of the engine block that needs to be removed.

Once the pulley is removed, the tension of the belt will decrease and it can be removed from its housing and replaced with a new one: after the replacement, you can reassemble the removed parts and check that everything is functioning properly.


Posted on 16 April 2025 by ScegliAuto


Related tutorials

How to replace the timing belt on the Renault Clio 1.2
How to replace the timing belt on the Renault Clio 1.2
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) The following steps will illustrate how to dismantle and replace the timing belt on the petrol Renault Clio 1.2. First, raise the vehicle and start b…
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Guide to Replacing the Timing Belt on the Renault Clio 1.2
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Today we will discover the instructions to remove and replace the timing belt on the petrol Renault Clio 1.2. First, open the bonnet and begin to dis…
Replacement of the timing belt of the Renault Clio 1.5 dCi
Replacement of the timing belt of the Renault Clio 1.5 dCi
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Below we will discover the information that will illustrate the procedure for dismantling and replacing the timing belt of the Renault Clio 1.5 dCi. …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos