Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Headlamps from a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Headlight

See other generations:
Video tutorial

In this video, see how to remove the front headlamp from a Renault Clio III. You will need a 10mm socket and a star bit. Start by removing the outer and inner screws of the bumper. This will loosen the bumper; repeat the procedure on the driver's side, then remove the two screws on the black trim that secures the bumper to the upper side of the engine bay. Once done, simply pull the bumper towards you, and it will come off easily.

Now that the headlamp is fully exposed, remove the two screws underneath and pull it towards you. You only need to disconnect the electrical connectors at the back, using a flathead screwdriver for assistance. Now the headlamp is free, and you can perform any necessary work or replace it.


Updated on 3 September 2026 by ScegliAuto


Related tutorials

How do you adjust the headlights of the Renault Clio?
How do you adjust the headlights of the Renault Clio?
Renault Clio (2019-2026 / Clio V, Clio 5) It will be possible to adjust the headlights of the Renault Clio by first inserting the ignition key into the lock in order to activate the instrumen…
Replacing Headlight Bulbs on a Renault Clio
Replacing Headlight Bulbs on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Removing the front bulbs from the Renault Clio. Lift the front bonnet of the car and secure it. Locate the caps that need replacing. Remove the cover…
How do you remove the front headlight of the Renault Clio?
How do you remove the front headlight of the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) To remove the front headlight of the Renault Clio, you will need to loosen the screws that secure the bumper to its housing: the screws that secure i…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos