Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the AdBlue Injector on the Renault Trafic

Model: Renault Trafic MK 3 - Years 2014-2026
Part: AdBlue warning light

In this video, we can clearly see where the AdBlue injector is located on the Renault Trafic. To see this component, do not look at the vehicle from the engine compartment, but from underneath, so you will need to lift it, at least enough to get underneath. Always remember that a jack is not the safest means to lift the vehicle, especially if you need to be underneath; it is better to use a hydraulic jack and then support the vehicle with axle stands. The injector is located outside the exhaust system and is clearly visible, positioned upstream of the particulate filter, with the additive supply pipes.

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

What to do if the injector warning light comes on in the Renault Trafic MK2
What to do if the injector warning light comes on in the Renault Trafic MK2
Renault Trafic (2001-2014 / MK 2) In this video we can see how to behave in case the injector light comes on in the Renault Trafic: it does not necessarily have to be an injector that…
How to reset the AdBlue top-up warning on the Renault Trafic
How to reset the AdBlue top-up warning on the Renault Trafic
Renault Trafic (2014-2026 / MK 3) These short and simple steps will show us how to reset the AdBlue liquid top-up warning on the Renault Trafic; to perform this operation, it will be …
How to reset the AdBlue warning light on the Renault Trafic?
Renault Trafic (2014-2026 / MK 3) If the AdBlue warning light on the Renault Trafic remains on even after refilling with the additive, it is possible that a programming error has occu…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos