Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Remote Key Battery on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Key

Video tutorial

Today's guide will show you how to disassemble and replace the battery of the electronic key remote for the Renault Kadjar. First, take your remote and use something thin and pointed to pry open the side, separating the two halves of the remote casing.

Then, remove the battery found inside on the circuit board, as shown in the video. At this point, install the new battery of the correct type (in this case, a CR 2032 3V); insert it the right way, ensuring the two halves of the remote casing fit together!


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery on a Renault Kadjar
How to Replace the Key Battery on a Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The steps to replace the battery in the Renault Kadjar key fob are simple and quick to perform independently. To replace the battery, remove the cove…
How to replace the battery of the Renault Kadjar key remote control.
How to replace the battery of the Renault Kadjar key remote control.
Renault Kadjar (2015-2022 / MK 1) In this guide we will see the instructions useful for disassembling and replacing the battery of the Renault Kadjar key remote. First, take our remot…
Replacing the Key Fob Battery on the Renault Kadjar
Replacing the Key Fob Battery on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) This short video will show you how to disassemble and replace the battery in the electronic key fob for the Renault Kadjar. First, take your key fob …

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos