Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Wiper Blade

Model: Renault Laguna MK III, X91, Laguna III, MK 3, Laguna 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Windshield wipers

See other generations:
Video tutorial

Nowadays, as you well know, almost all cars have a third wiper that keeps the rear screen clean. It may be true that sometimes you forget about it or use it less than the others, but it still needs to be replaced because the rubber used for the component is subject to weather conditions.

In this specific case, the operation is very simple. Just lift the arm off the glass and rotate the blade so that it is almost perpendicular to the support.

Now, by acting on the tab, you can release and remove the worn blade, replacing it with a new one compatible with the model and year of the car. Car model: Renault Laguna III Tools required: no specific tools are necessary.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to replace the windshield wiper on a Renault Laguna
How to replace the windshield wiper on a Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial we can see the entire procedure necessary to replace the front wipers of a Renault Laguna, third generation model produced from 2007…
How to Replace the Front Wipers on the Renault Laguna
How to Replace the Front Wipers on the Renault Laguna
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) In this tutorial, see how to replace the front wipers on the Renault Laguna, a very simple and quick operation. First, set the wipers to service mode…
Replacement of Wiper Blades
Replacement of Wiper Blades
Renault Laguna (2007-2015 / MK III, X91, Laguna III, MK 3, Laguna 3) Replacing the wiper blades is a very simple operation and should be done before winter arrives or as soon as you notice that the current wipers leave…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos