Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Renault Kangoo?

Model: Renault Kangoo MK 2, FC, FW - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Renault Kangoo, turn on the instrument panel by inserting the ignition key into the ignition switch: once powered on, navigate to the menu that appears on the display in the centre of the instrument panel until the tyre pressure option is shown.

When this option is displayed, press and hold the lower button located at the end of the lever on the right of the steering wheel: this will completely reset the warning light, and you can then turn off the instrument panel.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Light on a Renault Kangoo
How to Reset the Tyre Pressure Light on a Renault Kangoo
Renault Kangoo (1997-2008 / KC, MK 1, KW) To reset the tyre pressure light on a Renault Kangoo, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, na…
How to Reset the Tyre Pressure Warning Light on a Renault Kangoo
How to Reset the Tyre Pressure Warning Light on a Renault Kangoo
Renault Kangoo (2007-2021 / MK 2, FC, FW) These brief and simple instructions will show you how to reset the tyre pressure warning light (TPMS) on a Renault Kangoo; before performing the rese…
How to reset the tire warning light on the 2024 Renault Kangoo.
How to reset the tire warning light on the 2024 Renault Kangoo.
Renault Kangoo (2020-2026 / MK 3, KFK, FFK) To independently reset the tire warning light on your Renault Kangoo (2024), simply follow the guide below and apply the various steps. Once inside t…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos