|
Do it yourself
| |||
| ||||
How to Activate the Cornering Function of the Fog Lights on the Renault Megane IV
Model: Renault Megane
Megane IV, Megane 4
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
In this video, you will see how to activate the cornering function of the fog lights on the Megane IV: you will use the DDT4ALL program and, of course, you will need an OBDII interface; the one recommended by our YouTuber can be found on Amazon with the code B074SD3VD5 at a price of £29.99, with free delivery. Connect and search for your car model, go to the UPC-EMM control unit, then select the second USM-CMF1, and double-click on the lower cluster: the control unit takes a moment to load. Look for the section related to lights, then select "lights" (it will prompt "configuration": confirm). A page will open, and you need to modify "cornering inhibition" to 1 (which is true in binary code); you need to set the inhibition to false, which means you should write 0 (false in binary code). Press "send" and the modification is complete. For safety, turn off the car and leave it off for a few minutes.
Updated on 5 September 2026 by ScegliAuto
Related tutorials
Renault Megane
(2015-2023 /
Megane IV, Megane 4)
In this brief guide, discover how to activate and deactivate the Start&Stop system in the Renault Megane in simple steps. First, get in the vehicle a…
Renault Megane
(2002-2010 /
Megane 2)
Each of the fuses in the Renault Megane has the function of regulating the operation of a device that is present in the car: in this type of vehicle …
Renault Megane
(2002-2010 /
Megane 2)
All the fuse boxes on board the Renault Megane are designed to contain the fuses installed on the vehicle: in this car model there are two fuse boxes…
Other guides you may be interested in
|
How to Remove the Toll Tag Holder from the Car Windscreen
The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.019
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |