Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the R-Link 2 on the Renault Kadjar

Model: Renault Kadjar MK 1 - Years: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Checks and maintenance

Video tutorial

In this video, see how to remove the R-Link screen on the Renault Kadjar. You will need plastic spatulas to lever it out without damaging the dashboard with metal parts, which could scratch it irreparably.

Lever on the sides of the screen until the frame comes out. Gently remove the electrical connectors and now you will see the two screws at the bottom that need to be removed; after that, the display panel can be pulled towards you: the only obstacle will be the upper part of the ventilation panel, but loosening it slightly with your hands will allow the screen to come out of its housing.


Updated on 5 September 2026 by ScegliAuto


Related tutorials

How do you reset the R-Link 2 of the Renault Kadjar?
How do you reset the R-Link 2 of the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To reset the R-Link system of the Renault Kadjar, you will need to turn the ignition key so that you can turn on the instrument panel and also the ra…
How to reset the R-Link system on the Renault Kadjar?
How to reset the R-Link system on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To reset the R-Link system on the Renault Kadjar, turn on the instrument cluster by inserting the ignition key into its slot: once the cluster is on,…
Removing the R-Link System from Renault Kadjar
Removing the R-Link System from Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) To remove the R-Link system from the Renault Kadjar, follow these steps. Use plastic trim tools: first, obtain plastic trim tools to avoid damaging t…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos