Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the R-Link system on the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part: Warning light – error code

To reset the R-Link system on the Renault Kadjar, turn on the instrument cluster by inserting the ignition key into its slot: once the cluster is on, navigate through the menu that appears on the display in the centre of the dashboard. When the menu appears, select the "Settings" option: when the next screen appears, repeatedly press the point at the bottom left of the screen, as shown in the video. This will bring up the engineering menu, from which you can reset the system.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the R-Link 2 of the Renault Kadjar?
How do you reset the R-Link 2 of the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) To reset the R-Link system of the Renault Kadjar, you will need to turn the ignition key so that you can turn on the instrument panel and also the ra…
Disassembly of the R-Link system on Renault Kadjar
Disassembly of the R-Link system on Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) .. To disassemble the R-Link system on the Renault Kadjar, follow these steps. Use plastic spatulas: first of all, get plastic.. …
How to Remove the R-Link 2 on the Renault Kadjar
How to Remove the R-Link 2 on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) In this video, see how to remove the R-Link screen on the Renault Kadjar. You will need plastic spatulas to lever it out without damaging the dashboa…

Other guides you may be interested in

    Frequently Asked Questions

    • Kadjar 2015-2022 - What to do when the 'check injection' light comes on on the Renault Kadjar? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos