Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Renault Keycard

Model: Renault Renault Various
Part: Key

Video tutorial

In this video, you will see how to change the battery in a Renault keycard: with the keycard logo facing you, press the grey button located on the side of the keycard to extract the physical key. Once extracted, lever the part where the round compartment is located, which holds the button battery.

This way, you will see that the battery inside is a CR2032, which can also be found at a supermarket for a few pounds.

Replace it, ensuring correct polarity, then refit the semicircle cover and the physical key. Operation complete.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

Replacing the Battery in a Renault Keycard
Replacing the Battery in a Renault Keycard
Renault Renault Various To begin, press the side button on the keycard to extract the manual key. Once done, use a small flat screwdriver to lever in the central slot of the…
How to Open a Renault Door with the Emergency Key?
How to Open a Renault Door with the Emergency Key?
Renault Renault Various When the car battery or the remote control of a Renault is flat, you will need to open the car using the emergency key, which is located inside the k…
How to Replace the Battery in a Renault Key Card
How to Replace the Battery in a Renault Key Card
Renault Renault Various Let’s see how to replace the battery in a Renault key/card. Slide the shell (there is a live engraving area) down the back of the card. Once the shel…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos