Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Renault Megane

Model: Renault Megane Megane 2 - Years 2002-2010
Part: Tail light bulb

Follow these steps to replace the right and then the left rear headlamp bulb on a Renault Megane mk2: - Open the boot; - Unscrew the external support pin; - Remove the plastic cover of the light unit; - Unscrew the internal support pin; - Extract the headlamp from its housing, taking care with the two connectors; - Disconnect the connectors by lifting the tabs; - Remove the bulb by twisting it; Now, proceed to install the new bulb. - Insert the bulb into the headlamp; - Connect the two connectors; - Refit the headlamp into its housing; - Screw in the internal pin; - Close the cover; - Screw in the external pin; For the left headlamp bulb replacement, follow the same steps outlined above.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulb of the Renault Megane 3
How to replace the rear headlight bulb of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) To correctly and safely replace the rear headlight bulb of your Renault Megane Mk3, you need to follow these simple steps. First of all, turn off the…
How to replace the rear headlight bulb of the Renault Megane 3
How to replace the rear headlight bulb of the Renault Megane 3
Renault Megane (2008-2015 / Megane III, Megane 3) If you want to replace one of the bulbs located inside the rear light of your Renault Megane Mk3, all you have to do is follow the procedure describe…
How to replace the rear headlight bulb on the Renault Megane
How to replace the rear headlight bulb on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) The information provided in this guide will show us how to disassemble and replace the rear headlight bulb of the Renault Megane. First, we open the …

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos