Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Dismantling the Front Wheel Arch of the Renault Clio

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004

See other generations:
Video tutorial

Follow these instructions to dismantle and replace the front wing of the Renault Twingo in simple steps. First, open the bonnet and begin unscrewing the fastening screws located at the top of the front wing.

Then, open the door and unscrew the internal screws of the wing, as shown in the video. At this point, unscrew the fastening screws found on the wheel arch and under the wing, removing it and replacing it with the new one. Install the new wing correctly and reassemble all components!


Updated on 7 September 2026 by ScegliAuto


Related tutorials

Where is the Horn Located on a Renault Twingo?
Where is the Horn Located on a Renault Twingo?
Renault Twingo (2007-2014 / Twingo 2) This video shows where the horn is located on a Renault Twingo and how to proceed if you need to replace it, a very simple and quick operation. As sh…
How to replace the fuel filter in the Renault Clio?
How to replace the fuel filter in the Renault Clio?
Renault Twingo (1993-2007 / Twingo 1) In this tutorial we can see how to replace the fuel filter in the Renault Clio, an extremely simple and quick operation. First of all, we open the ta…
How to Remove the Radio on Renault Twingo 2
How to Remove the Radio on Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) In today's video tutorial, you will learn how to remove the original radio from the second series Renault Twingo, as well as from the Clio 3, by foll…

    Frequently Asked Questions

    • Twingo 2007-2014 - How many km does a Renault Twingo 1.2 petrol in reserve travel? Read answer
    • Twingo 1993-2007 - Where is the Renault Twingo horn located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos