Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on a Renault Twingo 1

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Spark plugs

See other generations:
Video tutorial

The procedure for replacing the spark plugs on a Renault Twingo 1 is very simple. Start by opening the bonnet of the vehicle and immediately remove the engine cover.

Use a pair of needle-nose pliers to disconnect the spark plug connectors. Using a 16mm socket, remove the faulty spark plugs.

Once the spark plugs are removed, insert the new ones, applying high-temperature thread sealant to the threads first. Install and tighten the new spark plugs using a 16mm socket, reconnect the connectors, and replace the engine cover.


Updated on 7 September 2026 by ScegliAuto


Related tutorials

How to Replace Spark Plugs on a Renault Twingo
How to Replace Spark Plugs on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) In this brief video tutorial, you can see how to replace the engine spark plugs on a first-generation Renault Twingo 1.2, produced from 1993 to 2007.…
How to Replace the Spark Plugs on the Renault Twingo 1.2
How to Replace the Spark Plugs on the Renault Twingo 1.2
Renault Twingo (1993-2007 / Twingo 1) Below are the instructions for removing and replacing the spark plugs on the Renault Twingo 1.2. First, open the bonnet of the vehicle and disconnect…
How to replace the spark plugs on the Renault Twingo 1
How to replace the spark plugs on the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) Replacing the spark plugs on the Renault Twingo 1 is a very simple task that can be done independently. Start the replacement by opening the front bo…

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos