Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on the Renault Twingo 1.2

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Spark plugs

See other generations:
Video tutorial

Below are the instructions for removing and replacing the spark plugs on the Renault Twingo 1.2. First, open the bonnet of the vehicle and disconnect the spark plug coils, located between the intake manifold; then use a socket wrench with an extension to unscrew and remove the four spark plugs, as shown in the video.

Now install the new spark plugs, screwing them in by hand before tightening gently with a spanner; reconnect the coils, and finally check that the engine starts correctly!


Posted on 22 July 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on a Renault Twingo 1
How to Replace the Spark Plugs on a Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) The procedure for replacing the spark plugs on a Renault Twingo 1 is very simple. Start by opening the bonnet of the vehicle and immediately remove t…
How to replace the spark plugs on the Renault Twingo 1
How to replace the spark plugs on the Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) Replacing the spark plugs on the Renault Twingo 1 is a very simple task that can be done independently. Start the replacement by opening the front bo…
How to Replace Spark Plugs on a Renault Twingo
How to Replace Spark Plugs on a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) In this brief video tutorial, you can see how to replace the engine spark plugs on a first-generation Renault Twingo 1.2, produced from 1993 to 2007.…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos