Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Centre Console of the Renault Laguna

Model: Renault Laguna MK 3, Laguna III, MK III, X91, Laguna 3 - Years 2007-2015
Part: Center console tunnel

In this guide, you will find the main instructions for removing and replacing the centre console of the Renault Laguna. First, get inside the vehicle and start by removing the plastic cover found under the glove compartment; then remove the gear knob and prise off the sides of the centre console to detach and remove it, disconnecting the electrical connections underneath, as shown in the video. At this point, replace the centre console if necessary, applying the reverse procedure for reassembly!

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the central tunnel on Renault Laguna
Disassembly of the central tunnel on Renault Laguna
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) To disassemble the central tunnel of the Renault Laguna 2, follow these steps: Remove the plastic cover: getting into the car, start by removing the …
How to Replace Gear Knob on Renault Laguna
How to Replace Gear Knob on Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, MK III, X91, Laguna 3) Let's see how to remove the gear knob and the protective gaiter from the top of the centre tunnel on a Renault Megane. Grip the knob and pull it upwa…
How to remove the heating radiator in a Renault Laguna?
How to remove the heating radiator in a Renault Laguna?
Renault Laguna (2001-2007 / MK 2, Laguna 2, X74) In this tutorial, you will see how to remove the heating radiator in a Renault Laguna. First, ensure that the engine is cold, then open the bonnet, l…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos