Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Laguna
    4. : How to replace gear knob on Renault Laguna

Renault Laguna - Video tutorial

Model: Renault Laguna MK 3, Laguna III, Laguna 3, MK III, X91 - Years 2007-2015
Part: Gear Shift Knob
Operation: How to replace gear knob on Renault Laguna

Let's see how to remove the gear knob and the protective cap from above the central tunnel of the Renault Megane. Grab the knob and pull it upwards, until it detaches from the rod, remove the leather cap with its frame from the edge of the central tunnel with a plastic lever. To carry out the assembly, take the cap with the plastic frame and insert it into the rod on the central tunnel, then insert the new knob and fix it until it locks. We block the plastic frame above the central tunnel in all its parts. Let's check the previously mounted plastics.


Posted on 9 January 2024 by ScegliAuto



How do you replace the gear knob on the Renault Laguna?
Renault Laguna (2001-2007 / X74, MK 2, Laguna 2) In order to replace the Renault Laguna gear knob, you need to pry the lower part of the leather boot that wraps the gear lever, so that the fixing cl
How to replace the gear knob of the Renault Laguna
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) Today we will discover the necessary instructions to disassemble and replace the gear knob of the Renault Laguna, in simple and quick steps. First of
How do you replace the gear knob on your Renault Laguna?
Renault Laguna (2007-2015 / MK 3, Laguna III, Laguna 3, MK III, X91) To be able to replace the gear knob on the Renault Laguna, simply grab the old knob and move it slightly first to one side and then to the other to b

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos