Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Car spark plugs change

Renault Scenic - Video tutorial

Model: Renault Scenic - Years 1996-2003
Part: Spark plugs
Operation: Car spark plugs change

the guide shows how to correctly change the car spark plugs. First of all, it is necessary to disconnect the couplers of the caps located above the spark plugs and, only then, to disconnect the caps. Do not use tools, such as screwdrivers, to avoid further damage. Finally, to remove the candles, just use the special keys. When fitting the new spark plug, the ideal would be to use a torque wrench that allows you to tighten the spark plug to the torque preset in the maintenance booklet, in order to avoid overtightening and damaging the threaded housing. Finally, just reassemble the caps and couplers. It is always advisable to carry out the replacement operation with the engine off, both to avoid physical damage and to avoid having difficulty removing the spark plug in the future.


Posted on 16 September 2023 by ScegliAuto



How to change the Renault Scenic RX4 spark plugs
Renault Scenic (1996-2003 / ) I will explain how to change the spark plugs of your car, first of all open your engine compartment and remove all the connectors that are present an
Replacing the spark plugs of the Renault Scenic.
Renault Scenic (2003-2009 / MK 2, Scenic 2) Below we will see the procedure useful for disassembling and replacing the engine spark plugs of the Renault Scenic, following the instructions below
How to replace the spark plugs on the Renault Scenic Rx4
Renault Scenic (1996-2003 / ) The replacement of the spark plugs is a maintenance that can easily be done by yourself; once the engine has cooled down, open the hood and start by

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos