Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Scenic
    4. : Replacing the spark plugs of the Renault Scenic.

Renault Scenic - Video tutorial

Model: Renault Scenic MK 2, Scenic 2 - Years 2003-2009
Part: Spark plugs
Operation: Replacing the spark plugs of the Renault Scenic.

Below we will see the procedure useful for disassembling and replacing the engine spark plugs of the Renault Scenic, following the instructions below. First of all, we open the engine hood of our car and begin to disconnect the battery; then we disconnect the spark plug connectors and use a socket wrench with an extension to unscrew and remove the four spark plugs, as shown in the video. At this point, we go on to install the new spark plugs, of the correct type and having the same pitch, screwing them in by hand and gently tightening with a wrench, following the video tutorial until the end!


Posted on 20 May 2023 by ScegliAuto



How to replace the spark plugs on the Renault Scenic Rx4
Renault Scenic (1996-2003 / ) The replacement of the spark plugs is a maintenance that can easily be done by yourself; once the engine has cooled down, open the hood and start by
How to change the Renault Scenic RX4 spark plugs
Renault Scenic (1996-2003 / ) I will explain how to change the spark plugs of your car, first of all open your engine compartment and remove all the connectors that are present an
Renault Grand Scenic 1.6 timing belt replacement guide
Renault Scenic (2003-2009 / MK 2, Scenic 2) Today's guide will show us the main steps to disassemble and replace the timing belt of the Renault Grand Scenic 1.6. First of all, we open the bonne

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos