Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the R-Link 2 of Renault vehicles?

Model: Renault Renault Various
Part: Warning light – error code

To reset the R-Link 2 of Renault vehicles, you need to turn on the instrument cluster by inserting the key into the ignition switch: this will power up the screen located in the centre of the dashboard, allowing you to select the option with the gear icon. On the screen that appears, repeatedly press the bottom right corner until the secret menu appears: at this point, you can select the option to reset the device, completing the reset procedure.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Renault Various If the R Link GPS system in your Renault suddenly experiences serious operational issues, simply perform a reset. This operation is fortunately quite…
Renault Renault Various To reset the R-Link 2 system installed on the instrument panel of Renaults, first insert the ignition key into the ignition switch and turn it to pow…
Renault Renault Various This video shows how to download the R-Link 2 from your Renault vehicle's toolbox. You can download it on your PC and then transfer it to your vehicl…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos