Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Clio
  6. : How to replace the Renault Clio window switch

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Window lift switch
Operation: How to replace the Renault Clio window switch

Remove the cap that covers the screw that blocks the part of the armrest where there are the buttons for the window control and that small glove box, then unscrew the screw accordingly and in this way you can remove all this piece of plastic, removing this part you can then disconnect the connectors connected to the window control. Now by lifting the various points that block the piece of buttons you can remove it from the back, take the new piece with the working buttons and replace it with the old one going to apply a slight pressure, reconnect the connectors and put everything back in its place.


Posted on 19 September 2023 by ScegliAuto



Renault Clio power window switch replacement guide
Renault Clio (1998-2005 / Clio 2, MK 2) In this short video we will see how to disassemble and replace the switch or buttons of the electric windows of the Renault Clio. First of all, we op
How to remove the power window button on the front door of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before we can start, we will have to go and open the front door of our Renault Clio. So let's start by unscrewing and removing the Torx screw that se
How to replace Renault Clio window switch
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see how to replace the Clio window regulator switch. Before starting the disassembly work, let's disconnect the battery terminals in the front

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the electric window lifter on the Renault Clio IV version does not work? Read Answer
    • Clio 1998-2005 - How do you remove the window switches on Renault Clio 2? Read Answer
    • Clio 2005-2013 - Why does the Renault Clio 3's electric window lifter not work? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos