Do it yourself
| ||||
|
Renault Twingo - Video tutorial
Model: Renault Twingo
Twingo 2
- Years 2007-2014 In order to replace the cabin fan of the Renault Twingo, you need to loosen the screws that secure the glove compartment on the passenger side, so that it can be completely removed. After removing the compartment, you can detach all the panels that make up the dashboard on the passenger side, removing them entirely. The fan will now be accessible and can be removed from its seat by unscrewing the screws and disconnecting the power cables. This way, you can insert the new fan into its seat and secure it properly.
Posted on 4 March 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.032
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |