Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Captur II

Model: Renault Captur MK 2 - Years 2019-2026
Part: Service warning light

In this video, see how to reset the orange light with a spanner icon on the instrument cluster of the Renault Captur II, which reminds you that you are approaching the mileage for the scheduled service. After performing the service, proceed to reset the notification device. While seated in the driver's seat, press the start button and insert the card. Using the two buttons at the top of the wiper control, select "maintenance interval" on the display. Press and hold the button below: the interval indication will appear, after a few seconds it will start to flash, it will update, and at the end of the flashing, release the button to complete the operation.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Renault Captur?
How to Reset the Service Light on a Renault Captur?
Renault Captur (2013-2019 / MK 1) To reset the Service light on a Renault Captur, turn on the instrument panel to navigate through the menu: press the button located at the bottom of …
How to Reset the Service Light on the Renault Captur?
How to Reset the Service Light on the Renault Captur?
Renault Captur (2013-2019 / MK 1) From the display of the Renault Captur, you can completely clear the Service light by turning on the instrument panel to access the menu. To do this,…
How do you reset the Service light on the Renault Captur?
How do you reset the Service light on the Renault Captur?
Renault Captur (2019-2026 / MK 2) To reset the Service light of the Renault Captur, you need to insert the ignition key into the corresponding slot, turn it to turn on the instrument …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos